Description du produit
Numéro de modèle: 5083 Application: Décorations, Dissipateur de chaleur, Outils de transport, Porte et fenêtre, Mur de verre, Grade de navire: Série 5000 Technique: Laminé à chaud Tempérament: O - H112 Surface: Finition de laminage Spécification: China Standard HS Code: 7606129000 Type: Feuilles d'aluminium Forme : Plat Traitement de surface : Finition de laminage Alliage : Alliage Certification : ASTM, JIS, GB/T, EN, ASTMB Marque : HM Origine : Chine
Feuille d'aluminium en alliage 5083 pour la production de yachts
Plaque d'aluminium super large
Alliage : 1050, 1060, 1100, 3003, 5052 5083 6061 5005 6082 etc.
Tampe : H12. H14. H16. H18. H112. H22. H24. H26. H32. H34. H36. H38. O etc.
Épaisseur : 0,2 mm - 400 mm
Largeur : moins de 2 800 mm
Longueur : moins de 10 000 mm
Emballage : norme d'exportation, couvrant avec du papier brun et un film plastique puis emballé avec une bande d'acier et une caisse/palette en bois
Origine : Chine
Plomb Temps : Dans les 25 jours
Productivité : 4000MT/Mois
Paiement : T/T, L/C irrévocable à vue
Remarques : L'exigence spécifique d'alliage, de trempe ou de spécification peut être discutée à votre demande.
Aluminium Plate / Slab 5052 |
Typical Chemistry (% Maximum unless shown as a range) |
Cu | Si + Fe | Mn | Mg | Zn | Cr | Al |
0.10 | 0.45 | 0.10 | 2.2 / 2.8 | 0.10 | 0.15 / 0.35 | Balance |
Characteristics |
5052 is one of the higher strength non-heat-treatable alloys. It has a high fatigue strength and is a good choice for structures subjected to excessive vibration. The alloy has excellent corrosion resistance, particularly in marine atmospheres. The formability of the grade is excellent and in the annealed condition it offers higher strengths than 1100 or 3003 grades. |
Typical Applications |
5052 is often used in high strength sheet metal work, marine components, appliances, fuel and oil tubing. |
Mechanical Properties |
| Tensile Strength | Yield Strength | Elongation | Brinell Hardness |
| ksi | MPa | ksi | MPa | % in 2" (50mm) | |
5052-0 | 28.0 | 196 | 13.0 | 91 | 25 | 47 |
5052-H32 | 33.0 | 231 | 28.0 | 196 | 12 | 60 |
5052-H34 | 38.0 | 266 | 31.0 | 217 | 10 | 68 |
Aluminium Plate / Slab 5083 |
Typical Chemistry (% Maximum unless shown as a range) |
Cu | Si | Fe | Mn | Mg | Zn | Cr | Ti | Al |
0.10 | 0.40 | 0.40 | 0.3 / 1.0 | 4.0 / 4.9 | 0.25 | 0.05 / 0.25 | 0.15 | Balance |
Characteristics |
5083 is the highest strength non-heat-treatable alloy in commercial use. It has good formability and weldability and retains excellent tensile strength in the weld zone by virtue of its as-rolled properties. It is used most often in structures requiring high weld efficiency and maximum weld strength. 5083 also has excellent resistance to corrosion. |
Typical Applications |
5083 is commonly used in highly stressed welded assemblies, dump truck boxes, storage tanks, and cryogenic vessels. |
Mechanical Properties |
| Tensile Strength | Yield Strength | Elongation | Brinell Hardness |
| ksi | MPa | ksi | MPa | % in 2" (50mm) | |
5083-0 | 42 | 294 | 21 | 147 | 22 | - |
5083-H321 | 46 | 322 | 33 | 231 | 16 | - |
Aluminium Plate / Slab 6061 |
Typical Chemistry (% Maximum unless shown as a range) |
Cu | Si | Fe | Mn | Mg | Zn | Cr | Ti | Al |
0.15 / 0.40 | 0.4 / 0.8 | 0.70 | 0.15 | 0.80 / 1.2 | 0.25 | 0.04 / 0.35 | 0.15 | Balance |
Characteristics |
6061 is a heat-treatable grade widely used in light to medium strength structural applications. The alloy has good corrosion resistance and weldability and possesses good formability in the 0 to T4 tempers. 6061 does lose appreciable strength when welded and it is replaced by the 5000 series alloys where afterweld strength is a prime consideration. |
Typical Applications |
6061 is used in structural areas where both strength and corrosion resistance is required, truck bodies and frames, and towers. |
Mechanical Properties |
| Tensile Strength | Yield Strength | Elongation | Brinell Hardness |
| ksi | MPa | ksi | MPa | % in 2" (50mm) | |
6061-0 | 18.0 | 126 | 8.0 | 56 | 25 | 30 |
6061-T4 | 34.0 | 238 | 22.0 | 154 | 21 | 65 |
6061-T6 (T651) | 44.0 | 308 | 41.0 | 287 | 17 | 95 |
Groupes de Produits : Feuille et plaque d'aluminium