Description du produit N° de modèle : 5052 Application : Outils de transport Grade : Série 5000 Technique : Laminé à chaud Etat : O - H112 Surface : Finition du broyeur Spécifications : Code HS standard de la Chine : 7606129000 Type : Feuilles d'aluminium Forme : Plat Traitement de surface : Finition du broyeur Alliage : Alliage Certification : ASTM, JIS, GB/T, EN, ASTMB Marque : HM Origine : Chine Application électronique 5052 Feuille d'aluminium

Plaque d'aluminium super large
Alliage : 1050, 1060, 1100, 3003, 5052 5083 6061 5005 6082 etc.
Tampe : H12. H14. H16. H18. H112. H22. H24. H26. H32. H34. H36. H38. O etc.
Épaisseur : 0,2 mm - 400 mm
Largeur : moins de 2 800 mm
Longueur : moins de 10 000 mm
Emballage : norme d'exportation, couvrant avec du papier brun et un film plastique puis emballé avec une bande d'acier et une caisse/palette en bois
Origine : Chine
Plomb Temps : Dans les 25 jours
Productivité : 4000MT/Mois
Paiement : T/T, L/C irrévocable à vue
Remarques : L'exigence spécifique d'alliage, de trempe ou de spécification peut être discutée à votre demande.

Aluminium Plate / Slab 5052

Typical Chemistry (% Maximum unless shown as a range)

Cu	Si + Fe	Mn	Mg	Zn	Cr	Al
0.10	0.45	0.10	2.2 / 2.8	0.10	0.15 / 0.35	Balance

Characteristics

5052 is one of the higher strength non-heat-treatable alloys. It has a high fatigue strength and is a good choice for structures subjected to excessive vibration. The alloy has excellent corrosion resistance, particularly in marine atmospheres. The formability of the grade is excellent and in the annealed condition it offers higher strengths than 1100 or 3003 grades.

Typical Applications

5052 is often used in high strength sheet metal work, marine components, appliances, fuel and oil tubing.

Mechanical Properties

	Tensile Strength		Yield Strength		Elongation	Brinell Hardness
	ksi	MPa	ksi	MPa	% in 2" (50mm)
5052-0	28.0	196	13.0	91	25	47
5052-H32	33.0	231	28.0	196	12	60
5052-H34	38.0	266	31.0	217	10	68

Aluminium Plate / Slab 5083

Typical Chemistry (% Maximum unless shown as a range)

Cu	Si	Fe	Mn	Mg	Zn	Cr	Ti	Al
0.10	0.40	0.40	0.3 / 1.0	4.0 / 4.9	0.25	0.05 / 0.25	0.15	Balance

Characteristics

5083 is the highest strength non-heat-treatable alloy in commercial use. It has good formability and weldability and retains excellent tensile strength in the weld zone by virtue of its as-rolled properties. It is used most often in structures requiring high weld efficiency and maximum weld strength. 5083 also has excellent resistance to corrosion.

Typical Applications

5083 is commonly used in highly stressed welded assemblies, dump truck boxes, storage tanks, and cryogenic vessels.

Mechanical Properties

	Tensile Strength		Yield Strength		Elongation	Brinell Hardness
	ksi	MPa	ksi	MPa	% in 2" (50mm)
5083-0	42	294	21	147	22	-
5083-H321	46	322	33	231	16	-

Aluminium Plate / Slab 6061

Typical Chemistry (% Maximum unless shown as a range)

Cu	Si	Fe	Mn	Mg	Zn	Cr	Ti	Al
0.15 / 0.40	0.4 / 0.8	0.70	0.15	0.80 / 1.2	0.25	0.04 / 0.35	0.15	Balance

Characteristics

6061 is a heat-treatable grade widely used in light to medium strength structural applications. The alloy has good corrosion resistance and weldability and possesses good formability in the 0 to T4 tempers. 6061 does lose appreciable strength when welded and it is replaced by the 5000 series alloys where afterweld strength is a prime consideration.

Typical Applications

6061 is used in structural areas where both strength and corrosion resistance is required, truck bodies and frames, and towers.

Mechanical Properties

	Tensile Strength		Yield Strength		Elongation	Brinell Hardness
	ksi	MPa	ksi	MPa	% in 2" (50mm)
6061-0	18.0	126	8.0	56	25	30
6061-T4	34.0	238	22.0	154	21	65
6061-T6 (T651)	44.0	308	41.0	287	17	95

Groupes de Produits : Feuille et plaque d'aluminium